Twists, shortens and pulls down to increase holding power. For medium duty anchoring of timber and steel fixtures to concrete.
Thông số kỹ thuật
Tính năng và tiện ích
● Through fixing - no marking out and repositioning
● Fully assembled
● Variety of head styles
● Unique sleeve design collapses during tightening to provide pull down onto fixture
● Integral nut and washer
● Finished head anchors, bolt can be easily removed
● Timber to concrete, formwork, battens, bottom plates
● Services – Ductwork, pipe brackets, cable trays, suspended ceilings
● Metalwork – Signs, handrails, gates
● Light to medium duty loading
Hướng dẫn sử dụng
1. Drill correct diameter hole to recommended depth for the DynaBolt™ selected.
2. Remove debris from hole by blowing out with compressed air or hand held blow out pump.
3. Insert anchor through fixture and tap in until washer contacts fixture.
4. Tighten bolt with a torque wrench to the recommended tightening torque for the DynaBolt™ selected.